Not logged in
Empty

DT9818

Isolated, Embedded USB Data Acquisition Module

OEM quantities starting at £880 / €995
The DT9818 is perfect for embedding in a custom application where isolation is required. The DT9818 is a high-performance data acquisition USB board that combines the functionality of multiple boards by providing simultaneous analog input and output, digital I/O, and counter/timer operations.
Many software choices make application development easy, from ready-to-measure programs that ship with the board to full graphical programming with our Measure Foundry application builder.



Zoom image
  • 150 kHz throughput on both the A/D and D/A with 16-bit resolution
  • Two version: 32SE / 16DI or 16SE / 8DI analog input channels
  • Two deglitched analog outputs for smooth waveform generation
  • 8 digital input and 8 digital output lines that can be clocked synchronously
  • Two 32-bit counter/timer channels that can be clocked synchronously at the analog input rate
  • 500 volt galvanic isolation prevents ground loops, maximizes analog signal integrity, and protects your computer
  • Runs on USB power... no external power required
  • Flexible clocking and triggering
  • Flexible acquisition modes for input operations, and flexible output modes for output operations
  • Embedded OEM or BNC / STP box version
Products Software Accessories Documents More Info Download Alternatives

DT9818-32-OEM
32 Channels OEM Embedded Version

  • 32 SE or 16 DI analog inputs
  • 2 connectors for all signal connections
  • PCB dimensions (LxW): 190mm x 100mm
Please log in for pricing
  

Mark for quotation

Add for comparison
DT9818-32-STP
DT9818 STP boxed version

  • 32 SE or 16 DI analog inputs
  • pluggable screw terminal panels for all signal connections
  • dimensions (LxWxH): 216mm x 106mm x 50mm
Please log in for pricing
  

Mark for quotation

Add for comparison
DT9818-32SE-BNC
32 channel DT9818 BNC boxed version

  • 32 SE analog inputs with BNC signal connections
  • BNC connectors for all analog I/O, 37-way D-Sub connector for digital I/O
  • (LxWxH): 250mm x 150 mm x 88 mm
  • connect 16 signals in differential mode via pairs of BNC connectors
Please log in for pricing
  

Mark for quotation

Add for comparison
DT9818-OEM
16 Channels OEM Embedded Version

  • 16 SE or 8 DI analog inputs
  • 2 connectors for all signal connections
  • PCB dimensions (LxW): 190mm x 100mm
Please log in for pricing
  

Mark for quotation

Add for comparison
DT9818-16SE-BNC
DT9818 BNC boxed version

  • 16 SE analog inputs with BNC signal connections
  • BNC connectors for all analog I/O, 37-way D-Sub connector for analog IN and two 37-way D-Sub connectors for digital I/O
  • dimensions (LxWxH): 216mm x 106mm x 50mm
  • connect 8 signals in differential mode via pairs of BNC connectors or via D-Sub connector
Please log in for pricing
  

Mark for quotation

Add for comparison
DT9818-8DI-BNC
DT9818 BNC boxed version

  • 8 DI analog inputs with BNC signal connections
  • BNC connectors for all analog I/O, 37-way D-Sub connector for analog IN and two 37-way D-Sub connectors for digital I/O
  • dimensions (LxWxH): 216mm x 106mm x 50mm
  • connect 16 signals in single-ended mode via D-Sub connector
Please log in for pricing
  

Mark for quotation

Add for comparison
EP355
Screw Terminal Panel for connecting Analogue I/O, C/T and Digital I/O

  • Interfaces to Connector J2 on DT983x-OEM Series and DT9818-OEM for Analogue Input signals
  • Interfaces to Connector J3 on DT983x-OEM Series and DT9818-OEM for Digital I/O signals and Analogue Output
  • Dimensions (LxWxH): 100mm x 76mm x35 mm
Please log in for pricing
  

Mark for quotation

More info
EP353
Accessory Panel for connecting Analogue IN and 5B/7B backplanes

  • Interface to Connector J2 on DT983x-OEM and DT9818-OEM
  • 37-way D-Sub Connector
  • Connection for interfacing 5B/7B backplane
Please log in for pricing
  

Mark for quotation

More info
EP356
Accessory Panel for connecting Analogue OUT, C/T and Digital I/O

  • Interfaces to Connector J3 on the DT983x-OEM Series and DT9818-OEM
  • Two 37-way D-Sub connectors
  • Dimensions (LxWxH): 100mm x 76mm x 28mm
Please log in for pricing
  

Mark for quotation

More info
STP37
Screw Terminal Panel

  • Interface via 37-way D-Sub connector.
  • 37 Screw Terminals for connection to field wiring.
  • For use with DT98xx-BNC, DT351, DT9824, and TEMPpoint/VOLTpoint/MEASURpoint
Please log in for pricing
  

Mark for quotation

More info
STP37-DIN
DIN Rail Mountable Screw Terminal Panel

  • Interface via 37-way D-Sub connector
  • 37 Screw Terminals for connection to field wiring
  • For use with DT98xx-BNC, DT351, TEMPpoint, VOLTpoint, MEASURpoint, DT9824
Please log in for pricing
  

Mark for quotation

More info
EP360
37-way cable

  • D-Sub connectors male/female
  • For use with DT98xx-BNC series, DT9820 series
  • Length: 2m
Please log in for pricing
  

Mark for quotation

More info
EP333
37-way cable

  • D-Sub connectors male/male
  • For use with DT98xx-BNC and DT351
  • Length: 2m
Please log in for pricing
  

Mark for quotation

More info
DIN Rail Mounting Kit (38760)
Conversion kit to enable DIN rail mounting (EN50022)

  • For DT9837 series, DT9835, DT9820 series, DT9800-BNC, DT9818-BNC, DT9834-BNC, DT9832-BNC, and DT9836-BNC.
  • 35 mm rail
  • rail not included
Please log in for pricing
  

Mark for quotation

More info
DT DataAcq OmniCD
Application Software for Data Acquisition

  • OmniCD included with hardware
  • 32-Bit and 64-Bit Windows device drivers
  • DT-Open Layers for .NET - native class library for all languages that conform to the Commen Language Specification (CLS), including Visual C#, Visual Basic.NET, Visual C++.NET, Visual J#.NET, ...
Please log in for pricing
More info

Measure Foundry Bundles
Application Builder for Test & Measurement Systems

  • 25% Discount on any Measure Foundry License in combination with any USB device or PCI board or DSP board from Data Translation
  • A complete solution for Test and Measurement Systems.
  • Configure Hardware Automatically
Please log in for pricing
More info

quickDAQ
Ready-to-Measure .NET Application for Data Acquisition

  • Acquires high speed analog signals simultaneously and directly to disk at up to 2.0 MHz per channel
  • Measures right out of the box with any DT-Open Layers for .NET compatible USB or PCI device, no code writing necessary
  • Displays live signals for real-time visual analysis
Please log in for pricing
  

Mark for quotation

More info

DTScope and DTChartRecorder
Freely Downloadable Applications

  • 16-channel Oscilloscope with comprehensive trigger functions
  • 16-channel Line Recorder for long-term Data Acquisition with multiple trigger control
  • Handles all basic data acquisition tasks
Please log in for pricing
More info

DTx-EZ (SP0970-CD)
Visual programming tools for developing applications with DT PCI and USB boards

  • 32-bit ActiveX controls in Visual Basic or Visual C++
  • .NET compliant
  • Use the example programs to quickly get up and running.
Please log in for pricing
More info

LV-Link
Use DT USB and PCI data acquisition boards with LabVIEW

  • interfaces with all DT USB and PCI data acquisition boards
  • emulates National Instruments' DAQmx Interface
  • online help file
Please log in for pricing
More info

DAQ Adaptor for MATLAB®
Interface to MATLAB and Simulink

  • Single environment for acquisition, analysis, and visualization.
  • Measurement with the Data Acquisition Toolbox
  • Interface to all Data Translation USB and PCI hardware.
Please log in for pricing
More info

Datasheets
Show file Datasheet
Specifications
Show file Specifications
User Manuals
Show file User's Manual
Free Applications
Show file DTScope
16-Channel Data Acquisition with Oscilloscope
Show file DTChartRecorder
16-Channel Data Acquisition with Line Recorder
These products may better fit to your requirements
Multi-function Modules
DT9834 series: higher sample rate (500 kHz), more input / output lines

Product overview
Show file USB DAQ overview

Back to product list

Print pageTo topHelpdeskHome
Data Translation UKPhone: +44-1256 33 33 30Fax: +44-1256 33 33 88Email: info@datx.co.uk